The Theater Master – Support
System Setup:
USB Input:
Network Renderer:
Technical Specifications
The Theater Master |
|
|---|---|
| Supported Formats (Input dependent) | 44.1kHz to 768kHz PCM up to 32 bits 1xDSD, 2xDSD, 4xDSD Supports DSD via DoP on all inputs |
| Digital Input | 1x Advanced isolated input module |
| XLR Analog Outputs | 7.14Vrms Maximum |
| 100 Ohm Balanced | |
| Galvanically isolated (Fronts independently isolated from other outputs) |
|
| Custom gain level available | |
| Master volume control | 1dB Steps |
| Channel level trim | 0.1dB step |
| Channel delay trim | 0.1mS step |
| Display | Custom discrete LED display. Adjustable brightness and auto-off featre |
| Controls | Isolated RS-232 IR Remote Knob/Buttons 2x MSB 12V trigger on power supply |
| Power Consumption | 100 Watts Less than 2W standby |
| Width: | 17.5 in (444 mm) |
| Depth: | 17.5 in (444 mm) |
| Height: | 3.125 in (79 mm) |
| Stack height: | 3.625 in (92 mm) |
| Weight: | 25.5 lbs (11 kg) |
| Width: | 25 in (635 mm) |
| Depth: | 25 in (635 mm) |
| Height: | 10 in (254 mm) |
| Weight: | 55 lbs (24 kg) |
MSB Remote USB charging cable 4X Spiked feet 4X Plastic foot inserts |
|
Theater Master Triple Power Base |
|
|---|---|
| AC Voltage | 100V (Fixed) 120/240V (Auto switching) |
| Power Consumption | 100 Watts with fully configured Theater Master DAC Less than 2W standby |
| Width: | 17.5 in (444 mm) |
| Depth: | 17.5 in (444 mm) |
| Height: | 3.125 in (79 mm) |
| Stack height: | 3.625 in (92 mm) |
| Weight: | 48 lbs (21 kg) |
| Width: | 25 in (625 mm) |
| Depth: | 25 in (625 mm) |
| Height: | 10 in (254 mm) |
| Weight: | 68 lbs (30 kg) |
3X IEC Power cord 12X Spiked feet 12X Plastic foot inserts |
|